View Personality

High End DataFlash (DATAFLSH.R96)

TODO, DIP SWITCHES ; "Data Flash Strobe", 3 DMX channels, filename :dataflsh.r96 ; ; Date By Description ; 09-08-95 R.Salzedo created ; 04-03-96 S. Anwar Revised for Sapphire 96 ; ;---------------------------------------------------------------------------- ; The device name, upto 11 characters, no spaces are allowed DEVICE Dataflash ; ;---------------------------------------------------------------------------- ; The Type of instrument, 1 & M must required for backward compatibility ; The middle number denotes the number of DMX channels used TYPE 1 3 M ; ;---------------------------------------------------------------------------- ; Patching Information. (Upto 10 lines allowed) ; Upto 10 lines of 159 chars are allowed including formulae ; Variables used d=dmx number(1..512), h=handle(1..60), n=devicename (11-char) ; Allowed modifiers ; +,-,*,/,(,) basic arithmatic ; % means remainder after divide ; & means logical AND ; | means logical OR ; R means reverse the bits of the curernt result (operates on a byte) ; ^ means logical Exclusive OR (operates on a byte) ; > means shift to the right ; < shift to the left ; r followed by number means get the value of that parameter ; d DMX address ; n Fixture name, a 0 terminated character string ; h The handle number DEVICEADDRESS "Handle %2d"h "Fixture %11s"n "DMX %03d"d "" "" "" "" "" "" "" DAEND ; ;---------------------------------------------------------------------------- ; Specify DMX limits ; ; minimum allowed dmx number MINDMX=1 ; ; maximum allowed dmx number MAXDMX=510 ; ; DMX number must be divisible by this DIVBY=1 ; ;---------------------------------------------------------------------------- ; DMX channel description ; ; Column by column description of each DMX channel ; 1. The channels bank number (1..12) ; 2. The upper faders in the bank (1) or the lower faders in the bank (61) ; 3. Channel type (L=LTP, H=HTP, I=Instant LTP, S=16-bit instant LTP, ; s=16-bit Fadeable LTP ; 4. DMX offset (1..number of DMX channels) ; 5. The output level is proportionally recdced by this level (0..100%) ; 6. The curve number (applicable only to HTP channels), usually set to 1 ; 7. Inverted (I) or Normal (N) ; 8. Attribute type (A=Color Wheel, BCD=Color Mix, E=Pan, F=Tilt, ; 0=uncategorised) ; 9. Checksum channel (Always 1) ;10. Attribute name, must be enclosed in quotes and upto 12 charcaters allowed ;11. The ON value of this channel (0..255) ;12. The Highlight level of this channel ;13. The Lolight level of this channel ; DMX 1 1 H 1 100 1N 0 0 "Dimmer" 255 255 255 8 1 L 2 100 1N 0 0 "Duration" 0 0 0 8 61 L 3 100 1N 0 0 "Rate" 0 0 0 END ; ;---------------------------------------------------------------------------- ; Text to be displayed when the Instrument is selected for Patching ; TEXT DATAFLASH: 3 Channel Bank 1:- Dimmer -- Bank 8:- Duration Flash Rate ----------------------------------------- Set DIP switch:- 2, 6, 7, 8 = ON 3, 4, 5 = OFF (see manual page 7) ENTER and/or note DMX number. Press a channel grab to patch Dataflash END