View Personality

Lampo HMI 575 (LPO575.R20)

; "Lampo HMI 575", 2 DMX channels, filename :lmpo575.r20 ; ; Date By Description ; 19-10-99 P.Bari Created ; 31-03-05 P.Rogers Revised device name ; ;---------------------------------------------------------------------------- ; The device name, upto 11 characters, no spaces are allowed DEVICE LPO_HMI575 2 DMX channels NAME "Lampo" "HMI 575" ; ;---------------------------------------------------------------------------- ; The Type of instrument, 1 & M must required for backward compatibility ; The middle number denotes the number of DMX channels used TYPE 1 2 M ; ;---------------------------------------------------------------------------- ; Mirror/Head resolution MIRROR 1 0 0 ; | | | ; | | |_______ maximum tilt movement (in degrees) ; | |___________ maximum pan movement (in degrees) ; |_______________ 1 means moving mirror, 2 means moving head ; ;---------------------------------------------------------------------------- ; Patching Information. (Upto 10 lines allowed) ; Upto 10 lines of 159 chars are allowed including formulae ; Variables used d=dmx number(1..512), h=handle(1..60), n=devicename (11-char) ; Allowed modifiers ; +,-,*,/,(,) basic arithmatic ; % means remainder after divide ; & means logical AND ; | means logical OR ; R means reverse the bits of the curernt result (operates on a byte) ; ^ means logical Exclusive OR (operates on a byte) ; > means shift to the right ; < shift to the left ; r followed by number means get the value of that parameter ; d DMX address ; n Fixture name, a 0 terminated character string ; h The handle number DEVICEADDRESS "Handle %2d"h "Fixture %11s"n "DMX %03d"d "" "" "" "" "" "" "" DAEND ; ;---------------------------------------------------------------------------- ; Specify DMX limits ; ; minimum allowed dmx number MINDMX=1 ; ; maximum allowed dmx number MAXDMX=511 ; ; DMX number must be divisible by this DIVBY=1 ; ;---------------------------------------------------------------------------- ; DMX channel description ; ; Column by column description of each DMX channel ; 1. The channels bank number (1..12) ; 2. The upper faders in the bank (1) or the lower faders in the bank (61) ; 3. Channel type (L=LTP, H=HTP, I=Instant LTP, S=16-bit instant LTP, ; s=16-bit Fadeable LTP ; 4. DMX offset (1..number of DMX channels) ; 5. The output level is proportionally recdced by this level (0..100%) ; 6. The curve number (applicable only to HTP channels), usually set to 1 ; 7. Inverted (I) or Normal (N) ; 8. Attribute type (A=Color Wheel1, BCD=Color Mix, E=Pan, F=Tilt, ; G=Iris, H=Dimmer, I=Gobo1, J=Gobo2, K=Gobo1_Rotate, L=Focus, ; M=Gobo2_Rotate, N=Color Wheel2, O=Shutter, P=Prism, Q=Zoom, ; R=Effect_Rotate, S=Frost, 0=uncategorised) ; 9. Checksum channel (Always 1) ;10. Attribute name, must be enclosed in quotes and upto 12 characters allowed ;11. The ON value of this channel (0..255) ;12. The Highlight level of this channel ;13. The Lolight level of this channel ; DMX 4 1 I 1 100 1N A 1 "Color" 0 0 40 1 1 H 2 100 1N H 1 "Effect" 48 48 48 END ; ;---------------------------------------------------------------------------- ; Text to be displayed when the Instrument is selected for Patching ; TEXT LAMPO HMI 575 Bank Faders Bottom Top --------------------- 1 Effect -- 2 -- -- 3 -- -- 4 Color -- 5 -- -- 6 -- -- 7 -- -- 8 -- -- 9 -- -- 10 -- -- INPUT fixture DMX No. Press a Fixture Select or Swop button to make the patch. END ATTR END ; ;---------------------------------------------------------------------------- ; Tables ; Color PFTABLE "Color" -1 1 "White" 1 0 "Blue" 2 28 "Yellow" 3 3f "Green" 4 56 "Light Blue" 5 70 "Pink" 6 87 "Purple" 7 a0 "Red" 8 ba "ColScrollSlw" 9 d7 "ColScrollFst" 10 ff PFEND PFTABLE "Effect" -1 2 "YellowFilt" 11 4c "HalognFilt" 12 70 "BlueFilt" 13 8c "DeFocus" 14 ff "Close" 15 0 "Open" 16 33 "Strobe" 17 cc "Black" 18 af PFEND