View Personality
Martin RoboColour (MTCOL.R96)
View Table
TODO, DIP SWITCHES, Check PF tables, Locate Fixture ; "Martin Roboscan Col", 5 DMX channels, filename :mtcol.r96 ; ; Date By Description ; 06-11-97 DBT created ; ;---------------------------------------------------------------------------- ; The device name, upto 11 characters, no spaces are allowed DEVICE RoboCol ; ;---------------------------------------------------------------------------- ; The Type of instrument, 1 & M must required for backward compatibility ; The middle number denotes the number of DMX channels used TYPE 1 5 M ; ;---------------------------------------------------------------------------- ; Patching Information. (Upto 10 lines allowed) ; Upto 10 lines of 159 chars are allowed including formulae ; Variables used d=dmx number(1..512), h=handle(1..60), n=devicename (11-char) ; Allowed modifiers ; +,-,*,/,(,) basic arithmatic ; % means remainder after divide ; & means logical AND ; | means logical OR ; R means reverse the bits of the curernt result (operates on a byte) ; ^ means logical Exclusive OR (operates on a byte) ; > means shift to the right ; < shift to the left ; r followed by number means get the value of that parameter ; d DMX address ; n Fixture name, a 0 terminated character string ; h The handle number DEVICEADDRESS "Handle %2d"h "Fixture %11s"n "DMX %03d"d "" "" "" "" "" "" "" DAEND ; ;---------------------------------------------------------------------------- ; Specify DMX limits ; ; minimum allowed dmx number MINDMX=1 ; ; maximum allowed dmx number MAXDMX=508 ; ; DMX number must be divisible by this DIVBY=1 ; ;---------------------------------------------------------------------------- ; DMX channel description ; ; Column by column description of each DMX channel ; 1. The channels bank number (1..12) ; 2. The upper faders in the bank (1) or the lower faders in the bank (61) ; 3. Channel type (L=LTP, H=HTP, I=Instant LTP, S=16-bit instant LTP, ; s=16-bit Fadeable LTP ; 4. DMX offset (1..number of DMX channels) ; 5. The output level is proportionally recdced by this level (0..100%) ; 6. The curve number (applicable only to HTP channels), usually set to 1 ; 7. Inverted (I) or Normal (N) ; 8. Attribute type (A=Color Wheel, BCD=Color Mix, E=Pan, F=Tilt, ; 0=uncategorised) ; 9. Checksum channel (Always 1) ;10. Attribute name, must be enclosed in quotes and upto 12 charcaters allowed ;11. The ON value of this channel (0..255) ;12. The Highlight level of this channel ;13. The Lolight level of this channel ; DMX; This label signifies the start of the instrument layout info. 1 1 L 1 100 1N 0 1 "LAMP ON OFF" 255 255 255 4 1 L 2 100 1N 0 1 "COL.1" 0 0 0 4 61 L 3 100 1N 0 1 "COL.2" 0 0 0 9 1 L 4 100 1N 0 1 "COL.3" 0 0 0 9 61 L 5 100 1N 0 1 "COL.4" 0 0 0 END TEXT ROBOCOLOR Bank Faders Bottom Top --------------------- 1 On/Off -- 2 -- -- 3 -- -- 4 Color1 Color2 5 -- -- 6 -- -- 7 Color3 Color4 !! set interface to !! !! full DMX !! !! dispw 10 on !! INPUT and/or note DMX number. Press a channel grab to make patch END ; ;---------------------------------------------------------------------------- ; Tables ; Color table PFTABLE "Colors" -1 1 2 3 4 5 "Col 1" 1 ff 0 0 0 0 "Col 2" 2 ff 28 0 0 0 "Col 3" 3 ff 40 0 0 0 "Col 4" 4 ff 58 0 0 0 "Col 5" 5 ff 60 0 0 0 "Col 6" 6 ff 78 0 0 0 "Col 7" 7 ff 90 0 0 0 "Col 8" 8 ff a8 0 0 0 "Col 9" 9 ff c0 0 0 0 "Col 10" 10 ff d8 0 0 0 PFEND