View Personality

Starway Servo Scan (SWSCAN.R20)

; "Starway Servo Scan", 16 DMX channels, filename :Sscan.r20 ; ; Date By Description ; 07-11-01 Edward Created ; 14-12-04 Phil Edited shortname to use prefix properly ;---------------------------------------------------------------------------- ; The device name, upto 11 characters, no spaces are allowed DEVICE SWServoScan 16 DMX channels NAME "Starway" "Servo Scan" ; ;---------------------------------------------------------------------------- ; The Type of instrument, 1 & M must required for backward compatibility ; The middle number denotes the number of DMX channels used TYPE 1 16 M ; ;---------------------------------------------------------------------------- ; Mirror/Head resolution MIRROR 2 530 280 ; | | | ; | | |_______ maximum tilt movement (in degrees) ; | |____________ maximum pan movement (in degrees) ; |_________________ 1 means moving mirror, 2 means moving head ; ;---------------------------------------------------------------------------- ; Patching Information. (Upto 10 lines allowed) ; Upto 10 lines of 159 chars are allowed including formulae ; Variables used d=dmx number(1..512), h=handle(1..60), n=devicename (11-char) ; Allowed modifiers ; +,-,*,/,(,) basic arithmatic ; % means remainder after divide ; & means logical AND ; | means logical OR ; R means reverse the bits of the curernt result (operates on a byte) ; ^ means logical Exclusive OR (operates on a byte) ; > means shift to the right ; < shift to the left ; r followed by number means get the value of that parameter ; d DMX address ; n Fixture name, a 0 terminated character string ; h The handle number DEVICEADDRESS "Handle %2d"h "Fixture %11s"n "DMX %03d"d "" "" "Set to Hi-Res Mode" "" "" DAEND ; ;---------------------------------------------------------------------------- ; Specify DMX limits ; ; minimum allowed dmx number MINDMX=1 ; ; maximum allowed dmx number MAXDMX=497 ; ; DMX number must be divisible by this DIVBY=1 ; ;---------------------------------------------------------------------------- ; DMX channel description ; ; Column by column description of each DMX channel ; 1. The channels bank number (1..12) ; 2. The upper faders in the bank (1) or the lower faders in the bank (61) ; 3. Channel type (L=LTP, H=HTP, I=Instant LTP, S=16-bit instant LTP, ; s=16-bit Fadeable LTP ; 4. DMX offset (1..number of DMX channels) ; 5. The output level is proportionally recdced by this level (0..100%) ; 6. The curve number (applicable only to HTP channels), usually set to 1 ; 7. Inverted (I) or Normal (N) ; 8. Attribute type (A=Color Wheel1, BCD=Color Mix, E=Pan, F=Tilt, ; G=Iris, H=Dimmer, I=Gobo1, J=Gobo2, K=Gobo1_Rotate, L=Focus, ; M=Gobo2_Rotate, N=Color Wheel2, O=Shutter, P=Prism, Q=Zoom, ; R=Effect_Rotate, S=Frost, T=Speed1, U=Speed2, 0=uncategorised) ; 9. Checksum channel (Always 1) ;10. Attribute name, must be enclosed in quotes and upto 12 characters allowed ;11. The ON value of this channel (0..255) ;12. The Highlight level of this channel ;13. The Lolight level of this channel ; DMX 3 1 s 1 100 1N E 1 "Pan" 128 -1 -1 0 0 L 2 100 1N E 1 "Pan Low" 128 -1 -1 3 61 s 3 100 1N F 1 "Tilt" 128 -1 -1 0 0 L 4 100 1N F 1 "Tilt Low" 128 -1 -1 8 1 I 5 100 1N 0 1 "Speed P/T" 0 0 0 8 61 I 6 100 1N 0 1 "Control" 255 0 0 4 1 I 7 100 1N A 1 "Colour" 0 0 0 6 1 I 8 100 1N I 1 "Gobo" 0 0 0 9 61 L 9 100 1N 0 1 "Frost" 0 0 0 9 1 L 10 100 1N P 1 "Prism" 0 0 0 6 61 I 11 100 1N J 1 "Rot.Gobos" 0 0 0 7 1 I 12 100 1N K 1 "Gobo.Index" 0 0 0 2 1 L 13 100 1N G 1 "Iris" 0 -1 -1 5 61 L 14 100 1N L 1 "Focus" 128 -1 -1 2 61 L 15 100 1N O 1 "Shutter" 48 0 0 1 1 H 16 100 1N H 1 "Dimmer" 255 255 255 END ; ;---------------------------------------------------------------------------- ; Text to be displayed when the Instrument is selected for Patching ; TEXT Servo Scan Hi-Res Encoder Banks Wheel A Wheel B --------------------- 1 Dimmer -- 2 Iris Shutter 3 Pan Tilt 4 Colour -- 5 -- Focus 6 Gobo Rot.Gobo 7 Gobo.Index-- 8 Speed P/T Control 9 Prism Frost 10 -- -- 11 -- -- INPUT fixture DMX No. Press a Fixture Select or Swop button to make the patch. END ATTR END ; ;---------------------------------------------------------------------------- ; Tables ; Positions PFTABLE "Positions" -1 1 3 "Middle" 21 80 80 "Left" 22 50 80 "Right" 23 b0 80 "Top" 24 80 50 "Bottom" 25 80 b0 "TLeft" 26 50 50 "TRight" 27 b0 b0 "BLeft" 28 50 b0 "BRight" 29 b0 50 PFEND ;Gobo Table PFTABLE "GOBO" 30 8 11 "Open" 11 05 0 "Gobo 1" 12 0a 0 "Gobo 2" 13 14 0 "Gobo 3" 14 1e 0 "Gobo 4" 15 23 0 "Gobo 5" 16 2d 0 "Gobo 6" 17 32 0 "Gobo 7" 18 3c 0 "Gobo 8" 19 46 0 "Gobo 9" 20 4b 0 PFEND ; Macros MACRO "LAMP ON" 1 6 "data" 0 82 "delay" 1 50 "data" 0 0 MEND MACRO "LAMP OFF" 3 6 "data" 0 eb "delay" 1 40 "data" 0 0 MEND MACRO "FAN MAX" 4 6 "data" 0 0 MEND MACRO "FAN MIN" 5 6 "data" 0 7f MEND