View Personality

Martin Image Scan (MTPISCAN.R96)

; "Martin ImageScan", 7 DMX channels, factory default, filename :mtpiscan.r96 ; ; Date By Description ; 3.1.97 S.W. Created ; ;Special notes for Martin Image Scan:- ; Built in focuses for dimmer channel ; 1 Turns on lamp (dimmer on) ; 2 Turns off lamp (dimmer off) ; ; Built in focuses for the image channel (high resolution) ; 11 STOP ; 12 Slow Clockwise ; 13 Fast Clockwise ; 14 Slow Anti Clockwise ; 15 Fast Anti Clockwise ; ; Built in orientation focuses (in degrees) ; 16 0 ; 17 90 ; 18 180 ; 19 270 ; 20 360 ; ; Note:- Because the reset function is on the same channel as the ; dimmer function care should be taken not to put the preset fader ; to full. It will be better to use built in focus 1 & 2 for turning ; on and off the dimmer. ;---------------------------------------------------------------------------- ; The device name, upto 11 characters, no spaces are allowed DEVICE MartinImage ; ;---------------------------------------------------------------------------- ; The Type of instrument, 1 & M must required for backward compatibility ; The middle number denotes the number of DMX channels used TYPE 1 7 M ; ;---------------------------------------------------------------------------- ; Mirror/Head resolution MIRROR 1 150 110 ; | | | ; | | |_______ maximum tilt movement (in degrees) ; | |___________ maximum pan movement (in degrees) ; |_______________ 1 means moving mirror, 2 means moving head ; ;---------------------------------------------------------------------------- ; Patching Information. (Upto 10 lines allowed) ; Upto 10 lines of 159 chars are allowed including formulae ; Variables used d=dmx number(1..512), h=handle(1..60), n=devicename (11-char) ; Allowed modifiers ; +,-,*,/,(,) basic arithmatic ; % means remainder after divide ; & means logical AND ; | means logical OR ; R means reverse the bits of the curernt result (operates on a byte) ; ^ means logical Exclusive OR (operates on a byte) ; > means shift to the right ; < shift to the left ; r followed by number means get the value of that parameter ; d DMX address ; n Fixture name, a 0 terminated character string ; h The handle number DEVICEADDRESS "Handle %2d"h "Fixture %11s"n "DMX %03d"d "" "" "Dip 1234 56789 0" "Address %04b %04b%b 0" d%256&15R>4, d%256&240R, d/256 "" "1=ON 0=OFF" "" DAEND ; ;---------------------------------------------------------------------------- ; Specify DMX limits ; ; minimum allowed dmx number MINDMX=1 ; ; maximum allowed dmx number MAXDMX=506 ; ; DMX number must be divisible by this DIVBY=1 ; ;---------------------------------------------------------------------------- ; DMX channel description ; ; Column by column description of each DMX channel ; 1. The channels bank number (1..12) ; 2. The upper faders in the bank (1) or the lower faders in the bank (61) ; 3. Channel type (L=LTP, H=HTP, I=Instant LTP, S=16-bit instant LTP, ; s=16-bit Fadeable LTP ; 4. DMX offset (1..number of DMX channels) ; 5. The output level is proportionally recdced by this level (0..100%) ; 6. The curve number (applicable only to HTP channels), usually set to 1 ; 7. Inverted (I) or Normal (N) ; 8. Attribute type (A=Color Wheel, BCD=Color Mix, E=Pan, F=Tilt, ; 0=uncategorised) ; 9. Checksum channel (Always 1) ;10. Attribute name, must be enclosed in quotes and upto 12 charcaters allowed ;11. The ON value of this channel (0..255) ;12. The Highlight level of this channel ;13. The Lolight level of this channel ; DMX 1 1 H 1 100 1N 0 1 "Shutter" 30 30 0 5 61 L 2 100 1N 0 1 "Focus" 160 0 0 7 1 S 3 100 1N 0 1 "Rotate" 0 0 0 0 0 L 4 100 1N 0 1 "R.Fine" 0 0 0 3 61 L 5 100 1N E 1 "Pan" 128 -1 -1 3 1 L 6 100 1N F 1 "Tilt" 128 -1 -1 8 1 I 7 100 1N 0 1 "Speed" 0 -1 -1 END ; ;---------------------------------------------------------------------------- ; Text to be displayed when the Instrument is selected for Patching ; TEXT Martin Image Scan. Bank Faders Bottom Top --------------------- 1 Shutter -- 2 -- -- 3 Tilt Pan 4 -- -- 5 -- Focus 6 Gobo -- 7 Rotate -- 8 Speed p/t -- !Assume factory set to 7 channel INPUT and/or note DMX number. Press a channel grab to make patch END ; ;---------------------------------------------------------------------------- ; Tables ; Positions PFTABLE "Positions" -1 5 6 "Middle" 21 80 80 "Left" 22 50 80 "Right" 23 b0 80 "Top" 24 80 50 "Bottom" 25 80 b0 "TLeft" 26 50 50 "TRight" 27 b0 b0 "BLeft" 28 50 b0 "BRight" 29 b0 50 PFEND PFTABLE "LampOnOFF" -1 1 "LampON" 1 20 "LampOFF" 2 0 PFEND PFTABLE "Image" -1 3 "Stop" 11 0 "Spin1" 12 84 "Spin2" 13 6a "Spin3" 14 3c "Spin4" 15 53 "Orient1" 16 c8 "Orient2" 17 d4 "Orient3" 18 e1 "Orient4" 19 ed "Orient5" 20 f9 PFEND MACRO "Reset Unit" 1 1 "data" 0 d2 "delay" 1 20 "data" 0 20 "delay" 1 10 MEND MACRO "Lamp ON" 2 1 "data" 0 f0 "delay" 1 20 "data" 0 20 "delay" 1 10 MEND