View Personality

Martin RoboColor Pro 400 (MTCPE400.R96)

TODO, DIP SWITCHES, Check PF tables, Locate Fixture ; "Martin Roboscan CP 400 extended DMX", 7 DMX channels, filename:mtcpe400.r96 ; ; Date By Description ; 19-01-95 J.B.Toby created ; ;---------------------------------------------------------------------------- ; The device name, upto 11 characters, no spaces are allowed DEVICE PRO-400 ; ;---------------------------------------------------------------------------- ; The Type of instrument, 1 & M must required for backward compatibility ; The middle number denotes the number of DMX channels used TYPE 1 7 M ; ;---------------------------------------------------------------------------- ; Patching Information. (Upto 10 lines allowed) ; Upto 10 lines of 159 chars are allowed including formulae ; Variables used d=dmx number(1..512), h=handle(1..60), n=devicename (11-char) ; Allowed modifiers ; +,-,*,/,(,) basic arithmatic ; % means remainder after divide ; & means logical AND ; | means logical OR ; R means reverse the bits of the curernt result (operates on a byte) ; ^ means logical Exclusive OR (operates on a byte) ; > means shift to the right ; < shift to the left ; r followed by number means get the value of that parameter ; d DMX address ; n Fixture name, a 0 terminated character string ; h The handle number DEVICEADDRESS "Handle %2d"h "Fixture %11s"n "DMX %03d"d "" "Dip Switch 1234 5678" "Address %04b %04b"d-1%256R>4,d-1%256R&15 "" " make sure unit is" " set to FULL DMX" " ( inside unit )" "" DAEND ; ;---------------------------------------------------------------------------- ; Specify DMX limits ; ; minimum allowed dmx number MINDMX=1 ; ; maximum allowed dmx number MAXDMX=506 ; ; DMX number must be divisible by this DIVBY=1 ; ;---------------------------------------------------------------------------- ; DMX channel description ; ; Column by column description of each DMX channel ; 1. The channels bank number (1..12) ; 2. The upper faders in the bank (1) or the lower faders in the bank (61) ; 3. Channel type (L=LTP, H=HTP, I=Instant LTP, S=16-bit instant LTP, ; s=16-bit Fadeable LTP ; 4. DMX offset (1..number of DMX channels) ; 5. The output level is proportionally recdced by this level (0..100%) ; 6. The curve number (applicable only to HTP channels), usually set to 1 ; 7. Inverted (I) or Normal (N) ; 8. Attribute type (A=Color Wheel, BCD=Color Mix, E=Pan, F=Tilt, ; 0=uncategorised) ; 9. Checksum channel (Always 1) ;10. Attribute name, must be enclosed in quotes and upto 12 charcaters allowed ;11. The ON value of this channel (0..255) ;12. The Highlight level of this channel ;13. The Lolight level of this channel ; DMX 2 61 L 1 100 1N 0 1 "Shutter" 0 0 0 1 1 H 2 100 1N 0 1 "Dimmer" 255 255 255 4 1 L 3 100 1N 0 1 "Color 1" 0 0 18 4 61 L 4 100 1N 0 1 "Color 2" 0 0 0 6 1 L 5 100 1N 0 1 "Gobo 1" 0 0 0 8 1 L 6 100 1N 0 1 "C.Speed" 0 0 0 8 61 L 7 100 1N 0 1 "I.Speed" 0 0 0 END ; ;---------------------------------------------------------------------------- ; Text to be displayed when the Instrument is selected for Patching ; TEXT Robo Color X Pro 400 Bank Faders Bottom Top --------------------- 1 Dimmer -- 2 -- Shutter 3 -- -- 4 Color1 Color2 5 -- -- 6 Gobo1 -- 7 -- -- 8 Dim spd Col spd INPUT and/or note DMX number. Press a channel grab to make patch END ; ;---------------------------------------------------------------------------- ; Tables PFTABLE "Colors" -1 3 4 6 "Col 1" 1 0 0 0 "Col 2" 2 38 0 0 "Col 3" 3 70 0 0 "Col 4" 4 a7 0 0 "Col 5" 5 e1 0 0 "Col 6" 6 0 0 0 "Col 7" 7 0 38 0 "Col 8" 8 0 70 0 "Col 9" 9 0 a7 0 "Col 10" 10 0 e1 0 PFEND ; Gobo table PFTABLE "Gobos" -1 5 "Gobo 1" 11 0 "Gobo 2" 12 2d "Gobo 3" 13 4b "Gobo 4" 14 7d "Gobo 5" 15 af "Gobo 6" 16 ff "Gobo 7" 17 0 "Gobo 8" 18 0 "Gobo 9" 19 0 "Gobo 10" 20 0 PFEND