View Personality

Movitec WL-250 (MOVWL250.R96)

; "WL250", 16 DMX channels, filename :Movwl250.r96 ; ; Date By Description ; 26-09-00 Luc Peumans created ; 15-03-01 P.Bari updated for sapphire 96 ; ;---------------------------------------------------------------------------- ; The device name, upto 11 characters, no spaces are allowed DEVICE MOV_WL250 ; ;---------------------------------------------------------------------------- ; The Type of instrument, 1 & M must required for backward compatibility ; The middle number denotes the number of DMX channels used TYPE 1 16 M ; ;---------------------------------------------------------------------------- ; Mirror/Head resolution MIRROR 2 530 280 ; | | | ; | | |_______ maximum tilt movement (in degrees) ; | |____________ maximum pan movement (in degrees) ; |_________________ 1 means moving mirror, 2 means moving head ; ;---------------------------------------------------------------------------- ; Patching Information. (Upto 10 lines allowed) ; Upto 10 lines of 159 chars are allowed including formulae ; Variables used d=dmx number(1..512), h=handle(1..60), n=devicename (11-char) ; Allowed modifiers ; +,-,*,/,(,) basic arithmatic ; % means remainder after divide ; & means logical AND ; | means logical OR ; R means reverse the bits of the curernt result (operates on a byte) ; ^ means logical Exclusive OR (operates on a byte) ; > means shift to the right ; < shift to the left ; r followed by number means get the value of that parameter ; d DMX address ; n Fixture name, a 0 terminated character string ; h The handle number DEVICEADDRESS "Handle %2d"h "Fixture %11s"n "DMX %03d"d "" "" "Set to 16 bit" "" "" DAEND ; ;---------------------------------------------------------------------------- ; Specify DMX limits ; ; minimum allowed dmx number MINDMX=1 ; ; maximum allowed dmx number MAXDMX=497 ; ; DMX number must be divisible by this DIVBY=1 ; ;---------------------------------------------------------------------------- ; DMX channel description ; ; Column by column description of each DMX channel ; 1. The channels bank number (1..12) ; 2. The upper faders in the bank (1) or the lower faders in the bank (61) ; 3. Channel type (L=LTP, H=HTP, I=Instant LTP, S=16-bit instant LTP, ; s=16-bit Fadeable LTP ; 4. DMX offset (1..number of DMX channels) ; 5. The output level is proportionally recdced by this level (0..100%) ; 6. The curve number (applicable only to HTP channels), usually set to 1 ; 7. Inverted (I) or Normal (N) ; 8. Attribute type (A=Color Wheel1, BCD=Color Mix, E=Pan, F=Tilt, ; G=Iris, H=Dimmer, I=Gobo1, J=Gobo2, K=Gobo1_Rotate, L=Focus, ; M=Gobo2_Rotate, N=Color Wheel2, O=Shutter, P=Prism, Q=Zoom, ; R=Effect_Rotate, S=Frost, 0=uncategorised) ; 9. Checksum channel (Always 1) ;10. Attribute name, must be enclosed in quotes and upto 12 charcaters allowed ;11. The ON value of this channel (0..255) ;12. The Highlight level of this channel ;13. The Lolight level of this channel ; DMX 3 61 s 1 100 1N 0 1 "Pan" 128 -1 -1 0 0 L 2 100 1N 0 1 "Pan Low" 128 -1 -1 3 1 s 3 100 1N 0 1 "Tilt" 128 -1 -1 0 0 L 4 100 1N 0 1 "Tilt Low" 128 -1 -1 8 1 I 5 100 1N 0 1 "Speed_p/t" 0 0 0 11 1 I 6 100 1N 0 1 "Control" 0 0 0 4 1 I 7 100 1N 0 1 "Colour1" 0 0 10 10 1 L 8 100 1I 0 1 "Cyan" 255 255 255 10 61 L 9 100 1I 0 1 "Magenta" 255 255 0 9 61 L 10 100 1I 0 1 "Yellow" 255 255 0 8 61 L 11 100 1N 0 1 "ColSpeed" 0 0 0 9 1 L 12 100 1N 0 1 "Macros" 0 0 0 6 61 L 13 100 1N 0 1 "Beamshp1" 0 0 0 6 1 L 14 100 1N 0 1 "Unused" 0 0 0 2 61 L 15 100 1N 0 1 "Shutter" 35 35 35 1 1 H 16 100 1N 0 1 "Lamps" 255 255 255 END ; ;---------------------------------------------------------------------------- ; Text to be displayed when the Instrument is selected for Patching ; TEXT Movitec WL-250 (16 ch) Bank Faders Bottom Top --------------------- 1 Dimmer -- 2 -- Shutter 3 Tilt Pan 4 Colour1 -- 5 -- -- 6 Unused BeamShp1 7 -- -- 8 Speed p/t Colspeed 9 Macros Yellow 10 Cyan Magenta 11 Control -- INPUT fixture DMX No. Press a Fixture Select or Swop button to make the patch. END ; ;---------------------------------------------------------------------------- ; Macros MACRO "LAMP ON" 1 6 "data" 0 80 "delay" 1 2e "data" 0 0 MEND MACRO "RESET" 2 6 "data" 0 80 "delay" 1 2e "data" 0 0 MEND MACRO "LAMP OFF" 3 6 "data" 0 eb "delay" 1 3e "data" 0 0 MEND;