View Personality

Showtec Hurricane 575 (STH575M2.R96)

; 'Showtec Hurricane 575', 16 DMX Channels, filename: STH575M2.r96 ; ; Date By Description ; 22-06-05 Phil Rogers Created from OBY5 ; ;---------------------------------------------------------------------------- ; The device name, upto 11 characters, no spaces are allowed DEVICE ST_HUR575M2 mode=16 DMX, 16bit 16 DMX Channels NAME "Showtec" "Hurricane 575, Mode 2: 16 DMX" ; ;---------------------------------------------------------------------------- ; The Type of instrument, 1 & M must required for backward compatibility ; The middle number denotes the number of DMX channels used TYPE 1 16 M ; ;---------------------------------------------------------------------------- ; Mirror/Head resolution MIRROR 0 570 270 ; | | | ; | | |_______ maximum tilt movement (in degrees) ; | |____________ maximum pan movement (in degrees) ; |_________________ 1 means moving mirror, 2 means moving head ; ;---------------------------------------------------------------------------- ; Patching Information. (Upto 10 lines allowed) ; Upto 10 lines of 159 chars are allowed including formulae ; Variables used d=dmx number(1..512), h=handle(1..60), n=devicename (11-char) ; Allowed modifiers ; +,-,*,/,(,) basic arithmatic ; % means remainder after divide ; & means logical AND ; | means logical OR ; R means reverse the bits of the current result (operates on a byte) ; ^ means logical Exclusive OR (operates on a byte) ; > means shift to the right ; < shift to the left ; r followed by number means get the value of that parameter ; d DMX address ; n Fixture name, a 0 terminated character string ; h The handle number DEVICEADDRESS "Handle %2d"h "Fixture %11s"n "DMX %03d"d "" "" "Set to 16 DMX, 16bit" "" "" DAEND ; ;---------------------------------------------------------------------------- ; Specify DMX limits ; ; minimum allowed dmx number MINDMX=1 ; ; maximum allowed dmx number MAXDMX=496 ; ; DMX number must be divisible by this DIVBY=1 ; ;---------------------------------------------------------------------------- ; DMX channel description ; ; Column by column description of each DMX channel ; 1. The channels bank number (1..12) ; 2. The upper faders in the bank (1) or the lower faders in the bank (61) ; 3. Channel type (L=LTP, H=HTP, I=Instant LTP, S=16-bit instant LTP, ; s=16-bit Fadeable LTP ; 4. DMX offset (1..number of DMX channels) ; 5. The output level is proportionally recdced by this level (0..100%) ; 6. The curve number (applicable only to HTP channels), usually set to 1 ; 7. Inverted (I) or Normal (N) ; 8. Attribute type (A=Color Wheel1, BCD=Color Mix, E=Pan, F=Tilt, ; G=Iris, H=Dimmer, I=Gobo1, J=Gobo2, K=Gobo1_Rotate, L=Focus, ; M=Gobo2_Rotate, N=Color Wheel2, O=Shutter, P=Prism, Q=Zoom, ; R=Effect_Rotate, S=Frost, 0=uncategorised) ; 9. Checksum channel (Always 1) ;10. Attribute name, must be enclosed in quotes and upto 12 charcaters allowed ;11. The ON value of this channel (0..255) ;12. The Highlight level of this channel ;13. The Lowlight level of this channel ; DMX 1 1 H 1 100 1N 0 1 "Dimmer" 255 128 128 2 1 L 9 100 1N 0 1 "Iris" 255 0 0 2 61 L 2 100 1N 0 1 "Shutter" 0 0 0 3 61 s 11 100 1N E 1 "Pan" 127 0 0 0 0 L 13 100 1N E 1 "Pan Low" 127 0 0 3 1 s 12 100 1N F 1 "Tilt" 127 0 0 0 0 L 14 100 1N F 1 "Tilt Low" 127 0 0 4 1 I 3 100 1N A 1 "Colour 1" 0 112 98 4 61 I 4 100 1N 0 1 "Colour 2" 0 0 0 6 1 I 5 100 1N 0 1 "Gobo 1" 0 0 0 6 61 I 6 100 1N 0 1 "Gobo 2" 0 0 0 7 61 I 7 100 1N 0 1 "Gobo 2 Rot" 0 0 0 5 1 L 10 100 1N 0 1 "Focus" 0 0 0 9 1 I 8 100 1N 0 1 "Prism" 0 0 0 10 61 I 15 100 1N 0 1 "Reset" 0 0 0 10 1 I 16 100 1N 0 1 "Lamp Switch" 48 0 0 END ; ;---------------------------------------------------------------------------- TEXT Showtec Hurricane 575 16 DMX, 16bit Bank Faders Bottom Top ----------------------------- 1 Dimmer -- 2 Iris Shutter 3 Tilt Pan 4 Colour 1 Colour 2 5 Focus -- 6 Gobo 1 Gobo 2 7 -- Gobo 2 Rot 8 -- -- 9 Prism -- 10 Lamp Switch Reset INPUT fixture DMX No. Press a Fixture Select or Swop button to make the patch. END ATTR END ;---------------------------------------------------------------------------- ; Macros MACRO "Lamp On" 1 16 "data" 0 48 "delay" 1 32 "data" 0 0 MEND MACRO "Lamp Off" 2 16 "data" 0 B8 "delay" 1 32 "data" 0 0 MEND MACRO "Reset" 3 15 "data" 0 E0 "delay" 1 32 "data" 0 4 MEND